Productdescription
Use testo 315-2 to check the CO level in ambient air. Even low concentrations of the highly poisonous gas are detected. In this way, you can judge whether the burner flue gases are being fully drawn off.
- Reliable warning of CO poisoning
- DVGW approval
- Adjustment of different alarm limits
- Printout with date/time and recommended value (alarm limit)
- With calibration protocol
- TopSafe, protection case for tough applications
- Quick and practical documentation of data on location, printout with date/time and recommended value (alarm limit)
Technical Data
| LCD, 2 lines |
| Storage temperature | -20 to +50 °C |
| Operating temperature | +5 to +45 °C |
| Battery type | 9V block battery |
| Weight | 400 g |
| Dimensions | 215 x 68 x 47 mm |
| Material/Housing | ABS |
| Probe type Electrochemical Probetype |
| Meas. Range | 0 to +2.000 ppm CO |
| Accuracy | ±10% of mv (+100 to +2.000 ppm CO) |
| Resolution | 1 ppm CO |
CO warning instrument, with battery and calibration protocol Reliable warning of CO poisoning DVGW approval With calibration protocol Quick and practical documentation of data on location, printout with date/time and recommended value (alarm limit) Meas. range 0 to +2000 ppm CO Accuracy ±1 digit ±10 ppm CO (0 to +100 ppm CO) ±10% of mv (+100 to +2000 ppm CO) Resolution/dt> 1 ppm CO
