testo 315-2

Productdescription

Use testo 315-2 to check the CO level in ambient air. Even low concentrations of the highly poisonous gas are detected. In this way, you can judge whether the burner flue gases are being fully drawn off.

  • Reliable CO warning
  • Adjustable alarm limits
  • Audible and visual alarm
  • Automatic zero point adjustment
  • Data printout on site with fast printer (optional)
  • TopSafe case protects from dirt, water and impact (optional)
  • Fast printer with printout
  • CO zeroing in contaminated room
  • Printout with date/time and recommended value (alarm limit)
  • With calibration protocol
  • TopSafe, protection case for tough applications
  • Quick and practical documentation of data on location, printout with date/time and recommended value (alarm limit)

Technical Data
LCD, 2 lines
Storage temperature -20 to +50 °C
Operating temperature +5 to +45 °C
Battery type 9V block battery
Weight 400 g
Dimensions 215 x 68 x 47 mm
Material/Housing ABS
Probe type Electrochemical Probetype
Meas. Range 0 to +2.000 ppm CO
Accuracy ±10% of mv (+100 to +2.000 ppm CO)
Resolution 1 ppm CO
Brochures
hvac_en.pdf (0 views)
CO warning instrument, with battery and calibration protocol
  • Reliable warning of CO poisoning
  • DVGW approval
  • With calibration protocol
  • Quick and practical documentation of data on location, printout with date/time and recommended value (alarm limit)
Meas. range
0 to +2000 ppm CO
Accuracy ±1 digit
±10 ppm CO (0 to +100 ppm CO) ±10% of mv (+100 to +2000 ppm CO)
Resolution/dt>
1 ppm CO
Online not buyable Ordernumber: 0632 0317
Images (1)